PZU-6-10kV-LK

Purpose:

A device is used for installation on an end cap with an eyelet and a supporting clamp PGN-1-5; PGN-2-6; PGN-2-6A; PGN-3-5; PG-25/6-12; PG-25/6-12A; PG-30/12-20; PG-30/12-20A; PG-30/12-20K; PG-30/18-28P suspension polymer insulator.

Voltage class: 6-20 kV

Short description:

The device is prefabricated and consists of a hood and two corrugated sleeves, is attached to the overhead line wire using internal reusable fasteners – ZMI-2 clips. The original design of the hood, consisting of two parts, interconnected from below by axial hinges, which allow you to open and close the hood. There are latches on the top for locking.

The composition of the device kit:

– casing of the bird protection device – 1 pc.;
– a means of fastening the casing on the wires (screed) – 4 pcs.;
– operation manual – 1 pc. per batch of PZU.

Overall dimensions, mm – 1485 x 82 x 175 (length x width x height).

Weight, kg – 0.450; 0.630 (NG).

Advantages:

Pre-assembly, quick installation of the hood “in two clicks”, lightness, compactness, cost-effectiveness of the product compared to similar devices from other manufacturers.

Power transmission pole equipped with PZU-6-10kV-LK