PZU-6-10kV-S-10/PZU-6-10kV-S-20

PZU-6-10kV-S-10/PZU-6-10kV-S-20

Purpose:

PZU-6-10kV-S-10 is used for installation on intermediate supports with pin insulation (insulators ShF-10, ShS-10, ShS-20G, ShTIZ-10V, ShTIZ-20V and their modifications) with wire fastening on clamps ZAK- 10-1.

PZU-6-10kV-S-20 is used for installation on intermediate supports with pin insulation (insulator ShF-20 and its modifications) with wire fastening on clamps ZAK-10-1.

Voltage class: 6-20 kV

Description:

PZU-6-10kV-S-10 – the device is designed for installation on pin insulators with a small skirt diameter with wire fastening on anti-vibration clamps ZAK-10-1, fastened to the overhead line wire using weather-resistant, high-strength clamps-screeds.

PZU-6-10kV-S-20 – the device is designed for installation on pin insulators with a large skirt diameter with wire fastening on anti-vibration clamps ZAK-10-1, fastened to the overhead line wire using weather-resistant, high-strength clamps-screeds.

The composition of the device kit:

– casing of the bird protection device – 1 pc.;
– a means of fastening the casing on the wires (screed) – 4 pcs.;
– operation manual – 1 pc. per batch of PZU.

Overall dimensions (length x width x height):

PZU-6-10kV-S-10 1400 x 135 x 160;

PZU-6-10kV-S-20 1400 x 180 x 160.

Weight, kg (no more than):

PZU-6-10kV-S-10 – 0.380;

PZU-6-10kV-S-20 – 0.390.

This model is intended for installation on pin insulators with a small skirt diameter of intermediate supports with wire fastening on ZAK-10-1 anti-vibration clamps.

Advantages:

The devices are one-piece, do not require pre-mounting assembly and assembly on a support. Ease of installation, lightness, compactness, cost-effectiveness compared to similar products from other manufacturers.

Power transmission pole equipped with PZU-6-10kV-S-20